FiiO FT5
Uden moms:
3.630,92kr
4.393,42kr
Udsolgt. Kontakt os for at aftale betingelser.
Varianter
Ask our experts!
Oversigt
Immerse yourself in hi-fi sound without the typical pitfalls of planar magnetic technology with FT5 from FiiO, a pair of over-ear, open-back planar headphones with large 90mm drivers and an ultra-thin diaphragm. Thanks to micron-scale engineering, these headphones sport incredibly rich sound while being easy to drive.
With 20 neodymium magnets per driver and silver-coated aluminum alloy wiring, the FT5 provides impressive bass, treble unmatched by comparable dynamic headphones, and the ability to be fully driven by portable devices like smart devices and media players. The magnesium-aluminum alloy construction ensures durability and a light weight for long, comfortable listening sessions. The FT5 includes four plug adapters (3.5mm TRS, 4.4mm TRRRS, 1/4" TRS, and balanced XLR 4 pin), a velvet pouch, a leather storage case, and two pairs of earpads: suede (attached by default) for a balanced sound, enhanced atmosphere, and supreme comfort, and protein leather for a clear sound, wide soundstage, and high detail.
Micron-Level Manufacturing and Technology
Sitting between dynamic moving coil and electrostatic headphones, planar magnetic headphones use a moving coil, like dynamics, but via a special, micron-level thin-film diaphragm, like electrostatic designs. Along with a 28 nm chip-scale process that yields a 6μm-thick diaphragm, the FT5 offers exceptionally detailed sound while also being much easier to drive, lowering power requirements.
Ultra-Thin 6μm Diaphragm
When it comes to headphones, diaphragm design is everything. Too thin, and its likely to fall off the chassis. Too thick, and the sound quality will suffer.
After extensive testing, FiiO determined that a 6μm PAR diaphragm offers the best balance of efficiency, reliability, and resolution. This material ensures the FT5 sports excellent dynamics, a highly detailed sound, and rich bass not typically found in planar magnetic headphones.
Large 90mm Planar Magnetic Driver
The FiiO FT5 employs an extremely high-performance 90mm planar magnetic driver. Compared to a traditional dynamic driver, a planar magnetic drivers converts electrical signals to acoustic sound energy in a much more uniform manner, vibrating far more evenly across its diaphragm than a dynamic coil design.
Thanks to this even distribution of vibration and the lesser rigidity of the planar design over a dynamic one, there is little distortion and audio signals can be expressed in an accurate, faithful way. This technology is ideal for a truly lossless high-fidelity sound.
Micron-Plated Aluminum-Silver Alloy Coils
Since all the weight in a flat-diaphragm headphone design like planar magnetic is concentrated on the metal coils, selecting the ideal material is key to success. After extensive testing, FiiO chose a lightweight aluminum alloy as the ideal material. These coils are then coated in silver to enhance conductivity, making the driver easier to power without sacrificing high-frequency detail and the rich sound characteristic of planar magnetic headphones.
20 Neodymium Magnets per Driver
Partly to ensure greater wearing comfort, 11 magnets are placed inside the FT5's planar driver and 9 magnets are placed on the outside, leading to 20 magnets per channel and 40 in total. This balanced placement of magnets allows the aluminum alloy coils to be evenly distributed in the magnetic field.
It also allows the driver diaphragm to be well balanced between the forces of the inner and outer magnets, guaranteeing consistent movement of the driver and reduced distortion. The FT5 employs N52 neodymium magnets with magnetic density up to 1.5T, providing the strong forces needed to driver the large planar magnetic driver.
High Sensitivity, Easy to Power
Traditionally, planar magnetic headphones are known for having low sensitivity, leading to many audiophiles using beefy desktop preamps to drive them to their full potential. Typically, this made them a poor choice for listening while on the go.
But the FT5 bucks this trend with its high-powered magnetic field, ultra-thin diaphragm, and nano-scale aluminum coating technology, allowing for a high sensitivity of 110 dB. This allows the FT5 to be easily driven by portable audio devices, allowing you to experience the golden hall of sound no matter where you are.
Lightweight Magnesium-Aluminum Alloy Construction
Since the FT5 features so many magnets, it needs a lightweight material that takes some of that load off without sacrificing durability. Enter the magnesium-aluminum alloy used in the FT5's construction. This alloy is only 64% as dense as aluminum, allowing the FT5 to be made much lighter for greater comfort during long sessions. This material also resists the intense vibrations of the 90mm drivers, providing superior sound quality.
Open-Back Design
The FT5 contains a specially designed open-back acoustic structure, with a driver housing in the rear used to carefully act as a soundwave baffle, isolating the sound waves in the front from those in the rear. The grille of the FT5 is scientifically designed to precisely control and accelerate the air flow of the driver. This results in both improved treble resolution over dynamic headphones and a much wider soundstage for an immersive listening experience.
3-Axis Swiveling Design
The FT5 inherits the 3-axis swiveling design used on other FT-series headphones. This allows the earcups to freely rotate and attach to you no matter the angle or size of your head. This provides improved audio quality as well thanks to a better seal between the earcup and your head.
Quality Cable Included
The FT5 comes with a 1.5 m cable made of 392 wires of silver-plated monocrystalline copper, each wire with a diameter of 24 AWG. The copper wires help to give a solid and highly detailed sound, fully transmitting lossless audio to your ears. This cable also connects to the headphones via two interchangeable 3.5mm jacks, allowing for easy configuration.
Funktioner
- For Audiophiles and Music Enthusiasts
- Large 90mm Planar Magnetic Drivers
- 20 Neodymium Magnets per Driver
- 6μm Ultra-Thin PAR Diaphragm
- High Sensitivity and Easy to Power
- Micron-Level Aluminum-Silver Alloy Coil
- 392 Wires of Silver-Plated Copper Cable
- Lightweight Magnesium-Alloy Construction
- Includes 2 Types of Earpads
- Includes 4 Types of Plug Adapters
Hvad er i kassen?
- FiiO FT5 Over-Ear Open-Back Planar Magnetic Headphones
- 4.4mm TRRRS to Two 3.5mm TS Detachable Audio Cable
- 3.5mm TRS Plug Adapter
- 1/4" to 3.5mm TRS Plug Adapter
- XLR 4-Pin Male to 4.4mm Female Balanced Plug Adapter
- 2 x Suede Earpad (Pre Installed)
- 2 x Protein Leather Earpad
- Velvet Bag
- Leather Storage Case
Specifikationer
| Style | Over-ear |
| Headphones Type | Wired |
| Open / Closed | Åben |
| Frekvensgang | 7 - 40 000 Hz |
| Impedans | 36 Ω |
| Lydtryk | 110 dB at 1 kHz / 110 Vrms, 96 dB/mW at 1 kHz |
| Maksimal Effekt | 2000 mW |
| Headphone Features | Detachable Cable |
| Vægt | 456 g |
| Farve | Sort |